ESUN PLA MATTE Filament – 1.75mm Dark Grey 1Kg
R 360.00
PLA-Matte is a cost-effective matte PLA filament that is environmentally friendly and easy to print. Compared with ABS, matte PLA has higher rigidity and PC-like strength and does not require a closed cavity. PLA matte filament has low shrinkage, no warping and no cracking quality, and suitable for large-size model printing; The support is easy to peel from the surface.
1 in stock
About this item
Delicate Matte PLA
With excellent matte printed surface, eSUN Matte PLA has better printing effect and doesn't have obvious layer lines than normal PLA. Not easy to break. Supporting structure of it is easy to peel off.
High Toughness & Better Adhesion
Compared to normal PLA filament, eSUN Matte PLA has higher toughness.Printed models are not easy to break or crack, which can be widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY. With upgraded paper reel, eSUN Matte PLA has better adhesion and printibility which improves the problem of bottom adhesion on the plate.
Stable Dimensional Tolerance
Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
Tangle Free & No Plugging
Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
Environmental Friendly Package & Reel
Scrap is reused to produce recyclable spool and packaging box. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
Parameter Information
| Density(g/cm3) | 1.329 |
| Melt Flow Index | 5.8（190℃/2.16kg） |
| Heat Distortion Temp(℃,0.45MPa) | 51 |
| Tensile Strength(MPa) (XY) | 25.976 |
| Tensile Strength(MPa)(Z) | 14.31 |
| Elongation at Break(%)(XY) | 7.23 |
| Elongation at Break(%)(Z) | 2.26 |
| Flexural Strength(MPa)(XY) | 42.6 |
| Flexural Strength(MPa)(Z) | 21.1 |
| Flexural Modulus(MPa)(XY) | 2249.05 |
| Flexural Modulus(MPa)(Z) | 1782.62 |
| IZOD Impact Strength(kJ/㎡)(XY) | 4.7 |
| IZOD Impact Strength(kJ/㎡)(Z) | 2.15 |
| Extruder Temperature(℃) | 190-230℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | ＜200mm/s |
| Heated Bed | Need |
You must be logged in to post a review.
Reviews
There are no reviews yet.